Sales Helpline: 0116 2763334

Open Monday - Friday: 9.00am to 5.00pm


Iron and Manganese Removal System 56lpm

Whole House Iron and Manganese Removal System

Will treat a Property with flow rates Up to 56LPM*

Economical Iron & Hydrogen Sulfide Filtration Media that out performs most traditional media.

No Oxidizing Chemicals Required

Effective from 5PH - 9 pH

The system has been designed to easily treat you iron an manganese problem

The System will require a backwash on a daily basis in order that the treatment process remains effective.

FILOX-R™ MEDIA

IRON, HYDROGEN SULFIDE, MANGANESE REMOVAL

Filox-R™ is used for removing iron, hydrogen sulfide, and manganese from water supplies. It is a media that utilizes an oxidation-reduction reaction and filtration process similar to Greensand, but at a much higher level of performance. Filox-R™ contains 80% manganese dioxide in an extremely unique cluster format for enhanced performance and maximized capacity. Filox-R™ out performs Greensand, Brim, etc. due to the purity of its particles, superior oxidation/filtration capacity, and durability.

 

Technical

Height 1625mm Approx
Diameter 330mm Approx
Connections 1 " BSP Inlet, Outlet
Drain Connection 1/2 hose

Max Flow Rate 56 lpm *
(subject to incoming contaminant's partial bypass may be required) 
Minimum Flow rate for backwash 47lpm

PH Range 5-9
ORP >negative 170 Millivolts

Removal Rates
Iron 15.00 PPM (15000 ug/l)
Hydrogen Sulfide 7 PPM (7000ug/l)
Manganese 3 PPM (3000 ug/l)


This media is suitable for use in most water conditions ORP Level must be above negative 170 millivolts, for conditions above 170 millivolts an additional oxidant may be required.

We strongly advise that if you are in any doubt regarding the suitability of this product, that you obtain a full water analysis and seek advice from one of our technical staff before going ahead with your purchase.

This system is designed only for the removal Iron, Manganese & Hydrogen Sulfide. Please seek advice from our technical team if you have other contaminants in your water supply that may be either harmful or effect the operation of this system.


Most units are supplied unassembled

*Bespoke Item* Restocking Charge Applicable  

Iron Problems
Iron in water can cause yellow, red, or brown stains on laundry, dishes, and plumbing fixtures such as sinks. In addition, iron can clog wells, pumps, sprinklers, and other devices such as dishwashers, which can lead to costly repairs. Iron gives a metallic taste to water, and can affect foods and beverages - turning tea, coffee, and potatoes black.

Forms of Iron

Iron can occur in water in a number of different forms. The type of iron present is important when considering water treatment. Water that comes out of the faucet clear, but turns red or brown after standing is “ferrous” iron, commonly referred to as “clear-water” iron. Water which is red or yellow when first drawn is “ferric” iron, often referred to as “red- water” iron. Iron can form compounds with naturally occurring acids, and exist as “organic” iron. Organic iron is usually yellow or brown, but may be colorless. Water containing iron bacteria is said to contain “bacterial” iron.

 

5002117314c793

Email us about this product



Iron and Manganese Removal System 56lpm

Detailed Image
Most Views With This Product

RRP £999.00

Special Offer £799.00
60 litre per minute UV System

60-litre-per-minute-uv-system-1_7835.gif
£799.00
View Details