Offer Price £1195.00
Now Less 5%
Offer Price £1195.00
Now Less 5%
Enhanced resin uses 30% less salt and water
Price Includes a free fitting kit with braided stainless steel hoses,
Waste Connection Kit
Hardness test Kit
7 Year parts and year labour warranty
Non Electric Twin Tank Water Softener
Meter Controlled Softener.
This Machine will only perform a regeneration based upon your water consumption, making it far more efficient than most other machines.
Once installed and set up, our water softener automatically performs a regeneration and supplies the entire property with softened limescale free water. It has the added benefit of being able to use either block or tablet salt.
WHY THIS IS THE ONE TO BUY?
The Twin Tank Softener differs in a number of ways from the traditional single tank units. The most obvious difference is the two tanks.
So why are two tanks better than one?
Single tank softeners can not supply soft water whilst performing a regeneration program. All softeners need to perform regeneration as they all have a limited amount of water that they can soften. Regeneration effectively cleanses the resin to allow it to continue to produce soft water. A single tank machine will perform this action normally in the early hours of the morning. The disadvantage of this is you have the possibility of the softener doing this either before it has used up its full capacity or worse still running out if you suddenly use more water than the machine thinks you will (sometimes you don't know when extra guests turn up so you can't expect a machine to.)
Because the Twin Tank has two tanks it can regenerate at any time of day or night as only one tank at a time is in service. When it has reached its capacity it performs a regeneration whilst the other tank continues to supply you with soft water.
All EMWC Water Softeners have a guarantee - at no extra cost! Because of its proven reliability, your Non Electric T10 water softener has a 7-year parts and a 7 year labour guarantee. This, alongside our proven track record for producing highly reliable equipment, has established us as one of the UK's most popular water softener companies.
MADE IN ENGLAND
This water softener is manufactured in the UK and is designed specifically for the UK market and for our domestic water system. It means that we, unlike other companies, "wet test” the softeners before they leave the factory, so you can rest assured that the water softener firstly works but more importantly, it doesn't leak.
ECONOMIC AND EFFICIENT
An EMWC Water Softener is very efficient in water usage. It uses over 60% less water than a conventional water softener during regeneration.
Solvent free - food grade resin.
There's something very special about an EMWC Water Softener; something that is unique and gives both incomparable performance and specification. The secret is in the resin that determines the quality of your soft water. All EMWC Water Softeners incorporate a resin that has been specially purified for household use. It is both food grade and free from chlorinated solvents (Solvent Free). No other water softener manufacturer can offer you this level of specification. The resin used in the T10 has been further enhanced to ensure your water remains soft up until the very last drop. So whether you bathe in it, shower in it, wash your hair in it, your clothes, or simply brush your teeth with it, the water from your EMWC water softener will not only be lovely and soft, but solvent free.
COMBINATION BOILERS AND PRESSURISED SYSTEMS
With more and more heating systems using either a combination boiler or a pressurised system, the need for a water softener with the available flow rate is of paramount importance. Unrivalled flow rate of up to 60 lpm, making it ideal for even the most demanding system.
Valve- Meter Controlled
Inlet/Outlet 3/4" Bsp male parallel
Overflow 1/2" Hose connector
Drain 3/8" O.D tubing
Max operating Pressure 8 bar (116 p.s.i )
Min Operating Pressure 1 bar (14.5 p.s.i )
Max water temperature - 30 degree C
Min water temperature - protect from freezing
BSI approved for use with aluminium heat exchange systems
Volume & Weight
Softener Resin volume 2 x 4.3 litres
Resin Vessel Dimensions 140mm Diameter x 400mm high
Salt Storage capacity 15K tablet salt
Depth 440mm - 17 inch
Height 485mm - 19 inch
Width 250mm - 10 inch
Please allow 20mm(1 inch) for the elbow connections on the side of the softener
Up to 538 Ltr Capacity per tank at 250ppm hardness
Only 234g salt used per regeneration
68% salt efficiency
50 litres / min peak flow at 2 bar pressure drop
30 litres / min Rated service flow at 1 bar pressure drop
10 litres Water used per Regeneration
1.9 1/ min Maximum flow rate to drain
11 Minutes Maximum Regeneration Time
< 1mg per litre Softened water hardness
Installing your softener - plumber or DIY? Every softener comes complete with fitting instructions, water hardness test kit, Waste & Overflow hoses and an option of a Full installation kit, allowing for installation by a plumber or DIY enthusiast.
Installation Kits please select from the options below
Pressurised Systems (Mega Flo) = 22mm Kit
Combination Boilers = Combi Kit
Standard Fittings (most Homes = 15 mm Kit
Standard Delivery by DPD (3-5 working days)
Next Day Delivery by DPD - £15.00
We are Here to Help
If you have any questions about our products, please pick up the phone and speak to one of our experts.
Call us on 0116 2763334. Our help line is open 9.00am - 5.00pm GMT, Monday to Friday.
If phone calls aren't for you, then our live chat is also available on our website 9.00am - 5.00pm GMT, Monday to Friday.
Have you already brought from us?
We're still here to help! Let us know how we can help and we will endeavour to answer any questions you may have.