Thin-Film Reverse Osmosis Membrane
High Flux and high sodium Chloride rejection.
This membrane is selected when high rejection and operating pressures as low as 200psig (1,379kPa) are desired. These elements allow moderate energy savings and are considered a standard in the industry.
Operating and design parameters
Membrane: Thin film TFM
Typical operating pressure: 14bar
Maximum pressure: 42 bar
Maximum Temperature: 50degrees C
pH Optimum: Optimum rejection at pH7.0 - 7.5 operating pH range 4.0 - 11.0 cleaning pH range 2.0 - 11.5
Feed NTU: <1
Feed SDI: <3
Chlorine tolerance: 1000ppm - hours, dechlorination recommended
Permeate flow: Maximum should not exceed specificationsEmail us about this product