The Legal Limit for nitrates is 50 mg/l
This system contanis a media that can remove the Nitrates from your water supply and then release them to waste water during its automatic regeneration. Salt is required during the regeneration cycle. Regeneration is required every 3-5 days
Sizing your System
The size of the unit required will relate to the following
Water Flow Rate.
For domestic use each person is responsable for approximately 160-200 litres of water use per day. this water use will include Drinking, Cooking, Bathing/Showering, Dishwasher/ Washing machinne & toilet flushing etc.
This machine can produce a Maximum of 10,000 Litres of water before regeneration with a nitrate figure of 50Mg/l
Please refer to the Chart below to decide if this unit is the correct size for your needas
Nitrate Reading 50Mg/l Capacity 10,000ltrs Max Number of People 16
Nitrate Reading 100Mg/l Capacity 5,000ltrs Max Number of People 8
Nitrate Reading 150Mg/l Capacity 3300ltrs Max Number of People 5
Nitrate Reading 200Mg/l Capacity 2500ltrs Max Number of People 4
Nitrate Reading 250Mg/l Capacity 1660ltrs Max Number of People 3
Nitrate Reading 300Mg/l Capacity 1420ltrs Max Number of People 2
Valve: Timer controlled
Inlet/Outlet 3/4" Bsp male parralel
Overflow 1/2" Hose connector
Drain 3/8" O.D tubing
Max operating Pressure 8 bar (116 p.s.i )
Min Operating Pressure 1 bar (14.5 p.s.i )
Max water temperature 30 degree C
Min water temperature Protect from freezing
Height 1006mm - 40 inch
Width 316mm - 12 inch
Depth 559mm - 22 inch
Resin Capacity 25 Ltr
16 lpm Maximum
We strongly advise that if you are in any doubt regarding the suitability of this product, that you obtain a full water analysis and seek advice from one of our technical staff before going ahead with your purchase.
This system is designed only for the reduction of Nitrates. Please seek advice from our technical team if you have other contaminants in your water supply that may be either harmful or effect the operation of this system.