Sales Helpline: 0116 2763334
Open Monday - Friday: 9.00am to 5.00pm
 
image

Add to Order

 

Standard 10 Nano Ceram insert 0.2m

A Revelation in Pre-Sediment Filtration !

HIGH FLOW, HIGH CAPACITY, 0.2M Pre-Sediment Pleated filter insert for use with Ultra Violet Systems, Reverse Osmosis System, Ceramic Filters, Chlorination, Ozonation, Ultrafiltration and Microfiltration.

The NanoCeram pre-filter cartridge is designed to treat the most difficult requirements in the treatment of rainwater, borehole, well, stream, river and even canal water.

Not only is the NanoCeram filter capable of holding a high capacity of particles from 10's of microns down to an extremely fine 0.2 microns, it also allows for far higher flow rates than those of membranes or ceramic filtration.


 TECHNICAL SPECIFICATION

Due to the extremely fine filtration capacity of its media, the NanoCeram will also stop some bacteria and cysts:
Cyst Retention: >5 LRV
Bacteria (Klebsiella Terringena) : > 5 LRV


 Turbidity Reduction: 1.5psi @4gpm


Filter surface area 490square inches (3,160square cm)
Efficiency: 99.9% reduction of 0.2m particulate
Suggested Flow 4gmp/ 15 L/min
Peak Flow Rate 10Gpm/ 38L/min
Dirt Holding Capacity 280280mg (Based on A2 Fine Test Dust)
Temperature Range: 39-135°F ( 4-57°C)
Maximum Pressure: 70 psi (4.83 Bar)
Effective ph Range: 5-10 PH


 DIMENSIONS

Inches: Diameter 2.75"    X Length 9.75"
CM:      Diameter 7cm X Length 24.8cm


For more information on this filter system please see the NanoCeram Handbook link under the picture at the top of page.

Quantity:
Price:
£69.95
 
Make an email enquiry about this product
 
EMWC © 2017
Product Disclaimer  
We accept PayPalCredit cards accepted