Remove limescale throughout your property without the need for Chemicals.
Limescale is a problem generated by hard water, it doesn’t care if you are a nice person or how many times you clean your house or service your boiler it will continue to cause you problems such as scale in kettles, shower heads, washing machines, dishwashers, irons etc, inefficient and wasteful central heating, skin irritation and dull hair, limescale staining on bathroom suites, tiles and kitchen ware poor lathering of soaps and shampoos and time wasted in descaling and additional cleaning, until you decide to do something about it.
HOW IT WORKS
An economical, efficient and easy to fit DIY solution to your limescale problem is an East Midlands Water Company SYSTEM 50 Limescale eliminator made in England. Using low frequency radio waves pioneered by our research and development team, the System 50 generates induction energy which alters the characteristics of the hardness salts. Instead of forming hard limescale the mineral salts stay in solution and existing scale goes into suspension and is gradually removed from the system. The limescale eliminator can be fitted onto all pipe materials such as Copper and Plastic.
WHY BUY OURS?
The System 50 is a genuine UK product, made in England, which has been manufactured by East Midlands Water Company in Leicester for over 20 years, this is one of our founding products and is still one of our most popular items, as such we have thousands of satisfied customers.
The induction energy created by the System 50 means that just one unit is needed to treat a whole house, you do not need separate units for a boiler or along your pipe work just one unit will do the job.
The system 50 modulates the induction energy so instead of one continuous output, which can be weakened through your water system, the frequency is created and then increased in three separate modules before being released in pulsating waves which flow throughout the water system keeping the induction energy to a maximum level.This maximum level of induction means that the structure of the minerals is changed to a microscopic size negating the need for a sediment filter.
The System 50 has two induction coils as standard, this is important as it allows the system to maintain optimum performance levels when faced with fluctuations in pressure and flow.
The System 50 provides an eco friendly, chemical free and proven way to treat the limescale in your property.
Easy DIY Fitting
The System requires no plumbing skills, Simply wrap the coils around your copper or plastic cold water pipe and plug the transformer into a three pin electrical socket. For best results the system should be located close to the rising main to treat as much of your water system as possible. In order to locate the system you may need to attach the transformer to an electrical extension socket
Water treated by the System 50 contains soft mineral crystals so you can happily drink the water and retain the healthy minerals for your hair, skin, teeth and bones.
These soft minerals stay in solution so there are no hard mineral deposits, this will prolong the life of your equipment such as washing machines, dishwashers, showers etc.
Over time there is precipitation of older scale into the water and this will increase the efficiency of your central heating system and save you money on your heating bills.
The soft minerals will be kinder to skin and hair and give you better lathering of soaps, shampoos, washing powders, shower gels etc.
When you have hard limescale deposits around your property dirt can cling to the crystalline scale, like in the toilet bowl! this makes it difficult to properly clean and sterilise your home without using powerful corrosive descalers, when this is changed to soft minerals, which stay in solution, cleaning is easier, more efficient and much less chemicals are needed.
The System 50 uses very little electricity, approximately £5.00 a year
The System 50 comes with a five year warranty as standard.
SPECIFICATION Will Treat A Five Bedroom Property
Hermetically sealed in high impact enclosure.
Advanced computerised electronics.
Frequency range 1100Hz - 3700Hz BS 3535
low voltage electrical safety.
Includes 9 volt transformer with 2 meter lead
Compliance with EMC regulations. EN 55014, EN 50081/1, EN 50082/1.
DIMENSIONS 180 x 120 x 45mm.
Manufactured to CE standards.
Conforms to BS3535
Warranty - Five year warranty.
* UK Mainland Postage & Package of £15.00 included in the price
Why not improve your drinking water and add on a ONE YEAR undersink drinking water filter system for pure filtered water on tap and Save £9.99!
If you intend fitting the system to pipework larger than 15mm diameter then please click on the options below:
Click on the option below to add a System 90 to your order for only £90.00